high pressure hoseHow do you wash spray paint of a driveway?
whats the driveway surface? Concrete?
That makes a bit of difference. Assuming its concrete, youre best bet is to use a combo of wire brush and cleaners.
These are products that are designed to dissolve paint: Oops, Goof-off, laquer thinner. I wouldnt go the muriatic acid route as thats a little to aggressive and unnecesary and may not do the trick anyway.
a $5 wire brush from hardware store and using one of these products will remove it.
Useless routes to pursue: garage and driveway cleaner/etcher, pressurewashing.
The wire brush and solvent route is the one to take. If this doesnt produce the result you want you might bump up the solvent to using a quart of paint stripper/remover - although this might make a ';clean mark'; on your driveway';.
There are several options. Assuming you don't have a pressure washer you can use tsp (trisodium phosphate) or graphittie remover or goof off, all are available in the paint department of Home Depot.
Go for the lacquer thinner and wire brush. Scrub a little, hose off, etc.
It will take some work but should do the trick.
acetone, or a pressure washer
No comments:
Post a Comment